Gold Member Since 2011
Audited Supplier

European Standard Webbing Sling, Hot Sale Webbing Sling, Wide Body of Webbing Sling manufacturer / supplier in China, offering Slingman Branding Web Sling, 2t*3m Double Round Sling, 4t*3m Single Round Sling and so on.

(/ )

Supplier Homepage Product Webbing Sling Slingman Branding Web Sling

Slingman Branding Web Sling

FOB Price: US $1.2 / Piece
Min. Order: 10 Pieces
Min. Order FOB Price
10 Pieces US $1.2/ Piece
Get Latest Price
Production Capacity: >300t One Month
Transport Package: Carton
Payment Terms: L/C, T/T, D/P, Western Union, Paypal

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: SLINGMAN
  • Material: Polyester
  • Fixed Form: Bolt Type
  • Rope Core Type: Hemp Core
  • Certification: GS, CE, ISO 9001
  • Size: 1t-10t
  • Length: According to Client′s Demand
  • Trademark: slingman or OEM
  • Origin: China
  • Type: Synthetic Fibre Sling
  • Lifting Capacity: >6T
  • Lifting Eye Type: Flat Eye
  • Shape: Flat
  • Sling Color: According to Clients′s Demand to Made It
  • Width: According to Client′s Demand
  • Safety Factor: 5:1, 6:1, 7:1, 8:1
  • Specification: EN1492-1
  • HS Code: 56090000
Product Description
Instructions for the safe use of: Flat Woven Webbing Slings
    Store and handle belt slings correctly. Inspect belt slings and accessories before use and before placing into storage. Follow safe slinging practices, as given overleaf. Position the bight for choke lift at 120° (natural angle). Position the sling so that the load is uniformly spread over its width and protect the sling from sharp edges. Apply the correct mode factor for the slinging arrangement.
    Attempt to shorten, knot or tie belt slings. Expose belt slings to direct heat or flames. Use belt slings at temperatures above 80°C or below 0°C without consulting the supplier. Expose belt slings to chemicals without consulting the supplier. Shock load belt slings. Use belt slings which are cut or which have loose or damaged stitching.
Selecting the Correct Sling
Belt slings are available in a range of materials and sizes in single leg and endless sling forms. Select the slings to be used and plan the lift taking the following into account:
Material - polyester is resistant to moderate strength acids but is damaged by alkalis; polyamide (Nylon) is virtually immune to alkalis but is damaged by acids; and polypropylene is little affected by acids or alkalis but is damaged by some solvents, tars and paints.
Capacity - the sling must be both long enough and strong enough for the load and the slinging method.
Apply the mode factor for the slinging method.
For use at temperatures exceeding 80°C or below 0°C refer to the suppliers instructions.
If the slings are used in multi-leg arrangement the angle formed between the legs should not be less than 30° or greater than 90°.
If abrasion, heat generated by friction or cutting from edges or corners are likely select a sling fitted with protective sleeves and/or use suitable packing.
Storing and Handling Belt Slings

Never return wet, damaged or contaminated slings to storage. They should be cleaned with clear water and dried naturally. Never force dry belt slings. 
Store belt slings hung from non-rusting pegs which allow the free circulation of air. 
The storage area should be dry, clean, free of any contaminates and shaded from direct sunlight. 
Do not alter, modify or repair a belt sling but refer such matters to a Competent Person. 
NOTE: The material from which the sling is manufactured may be identified by the colour of the label or printing on the label: Polyester = Blue, Polyamide (Nylon) = Green, Polypropylene = Brown and the sling may also be dyed with a colour code to indicate SWL.
Using Belt Slings Safely
Do not attempt lifting operations unless you understand the use of the equipment, the slinging procedures and the mode factors to be applied. 
Do not use defective slings or accessories. 
Check the correct engagement with fittings and appliances, ensure smooth radii are formed, do not twist or cross slings and do not overcrowd fittings. 
Position the sling so that the load is uniformly spread over its width. 
Position the bight for a choke lift at the natural (120°) angle to prevent friction being generated. 
Ensure that stitching is in the standing part of the sling away from hooks and other fittings. 
Take the load steadily and avoid shock loads. 
Do not leave suspended loads unattended. In an emergency cordon off the area.

In-service Inspection and Maintenance 
Maintenance requirements are minimal. Belt slings may be cleaned with clear water. Remember weak chemical solutions will become increasingly stronger by evaporation.
Regularly inspect belt slings and, in the event of the following defects, refer the sling to a Competent Person for thorough examination: illegible markings; damaged, chaffed or cut webbing; damaged or loose stitching; heat damage; burns; chemical damage; solar degradation; damaged or deformed end fittings.
© Lifting Equipment Engineers Association 2004 SI No. 3.2
Safe use of Slings
o Good slinging practice must ensure that the load is as safe and secure in the air as it was on the ground and that no harm is done to the load, lifting equipment, other property or persons.
o Establish the weight of the load, ensure the lifting method is suitable and inspect the sling and attachments for obvious defects. Prepare the landing area making sure the floor is strong enough to take the load. Follow any specific instructions from the supplier.
 Ensure the lifting point is over the centre of gravity. Any loose parts of the load should be removed or secured. Secure the sling firmly to the load by hooks onto lifting points or shackles etc. The sling must not be twisted, knotted or kinked in any way. 
o Use packing to prevent damage to the sling from corners or edges and to protect the load.
o Do not exceed the SWL or rated angle. Any choke angle must not exceed 120° and any basket 90°.
o Do not hammer, force or wedge slings or accessories into position; they must fit freely.
o When attaching more than one sling to the hook of the appliance use a shackle to join the slings and avoid overcrowding the hook.
o Use an established code of signals to instruct the crane driver.
o Ensure the load is free to be lifted and not, for example, bolted down.
o Check that there are no overhead obstacles such as power lines.
o Keep fingers, toes etc clear ensuring they do not become trapped when lifting, lowering or controlling loads.
o Make a trial lift by raising the load a little to ensure it is balanced, stable and secure and if not lower it and adjust the slinging arrangement.
o Where appropriate use tag lines to control the load.
o Except where special provision is made, do not allow anyone to pass under or ride upon the load. The area should be kept clear.
o Make a trial set down, ensure the sling will not become trapped and the load will not tip when the slings are released. Use supports which are strong enough to sustain the load without crushing.
 Never drag slings over floors etc or attempt to drag a trapped sling from under a load. 
o Never use a sling to drag a load.
o Place the hooks of free legs back onto the master link and take care to ensure that empty hooks do not become accidentally engaged.
 Never use slings in contact with chemicals or heat without the manufacturers approval. 
o Never use damaged or contaminated slings.
o On completion of the lift return all equipment to proper storage.


Send your message to this supplier
Mr. Xue
To: Mr. Xue

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

Find Similar Products By Category